Filter
Top Products
5 BIOS setup
130
Resume on
AC Power
Loss
Stays Off
Power On
Last State
Determines the mode of
operation if a power loss
occurs. Stays off, the sys-
tem will remain off once
power is restored. Power
On, boots the system after
power is restored.
“Last State” is
only displayed if
the Intel Man-
agement Mod-
ule is present.
When displayed,
“Last State” is
the default.
When set to
“Stays Off,”
“Power Switch
Inhibit” is dis-
abled.
FRB-2 Policy Disable BSP
Do not dis-
able BSP
Retry on
Next Boot
Disable
FRB2 Timer
This controls action if the
boot processor will be dis-
abled or not.
“Disable BSP”
and “Do not dis-
able BSP” are
only displayed if
the Intel Man-
agement Mod-
ule is present.
Late POST
Timeout
Disabled
5 minutes
10 minutes
15 minutes
20 minutes
This controls the time limit
for add-in card detection.
The system is reset on tim-
eout.
Hard Disk
OS Boot
Timeout
Disabled
5 minutes
10 minutes
15 minutes
20 minutes
This controls the time limit
allowed for booting an
operating system from a
Hard disk drive. The action
taken on timeout is deter-
mined by the OS Watch-
dog Timer policy setting.
PXE OS Boot
Timeout
Disabled
5 minutes
10 minutes
15 minutes
20 minutes
This controls the time limit
allowed for booting an
operating system using
PXE boot. The action
taken on timeout is deter-
mined by OS Watchdog
Timer policy setting.
Feature Options Help Text Description