Filter
Top Products
43
To discover a DHCP-allocated IP address
Once a DHCP server has allocated an IP address, you will need to know it in
order to access the AdderView CATx IP via a network connection. To discover
the allocated IP address:
1 In network section of either the standard configuration menus or the
configuration pages via viewer, set the ‘Use DHCP’ option to ‘Yes’ and
select ‘Save’. Once the page is saved, the AdderView CATx IP will contact
the DHCP server and obtain a new address.
2 Re-enter the same ‘Network configuration’ screen where the new IP address
and network mask should be displayed.
DNS addressing
As with any other network device, you can arrange for your AdderView CATx IP
to be accessible using a name, rather than an IP address. This can be achieved in
two main ways:
• For small networks that do not have a DNS (Domain Name System) server,
edit the ‘hosts’ files on the appropriate remote systems. Using the hosts file,
you can manually link the AdderView CATx IP address to the required name.
• For larger networks, declare the IP address and required name to the DNS
server of your local network.
The actual steps required to achieve either of these options are beyond the
scope of this document.