Adder Technology X200AS/R Network Card User Manual


 
 




44
Placing AdderView CATx IP alongside the firewall
AdderView CATx IP is built from the ground-up to be secure. It employs a
sophisticated 128bit public/private key system that has been rigorously analysed
and found to be highly secure (a security white paper is available upon request
from Adder Technology Ltd). Therefore, you can position the AdderView CATx
IP alongside the firewall and control hosts that are also IP connected within the
local network.
IMPORTANT: If you make the AdderView CATx IP accessible from the public
Internet or from a modem, care should be taken to ensure that the maximum
security available is activated. You are strongly advised to enable encryption and
use a strong password. Security may be further improved by restricting client
IP addresses, using a non-standard port number for access or limiting remote
access to dial up connections only.
Ensuring sufficient security
The security capabilities offered by the AdderView CATx IP are only truly effective
when they are correctly used. An open or weak password or unencrypted link
can cause security loopholes and opportunities for potential intruders. For
network links in general and direct Internet connections in particular, you should
carefully consider and implement the following:
Ensure that encryption is enabled.
By standard configuration menu or by configuration page via viewer.
Ensure that you have selected secure passwords with at least 8 characters
and a mixture of upper and lower case and numeric characters.
By configuration page via viewer.
Reserve the admin password for administration use only and use a non-
admin user profile for day-to-day access.
Use the latest Secure VNC viewer (this has more in-built security than is
available with the Java viewer). To download the viewer.
Use non-standard port numbers.
Restrict the range of IP addresses that are allowed to access the AdderView
CATx IP to only those that you will need to use. To restrict IP access.
Do NOT Force VNC protocol 3.3. Configuration page via viewer.
Add a further level of inherent security by restricting access only via modem
or ISDN dialup.
Ensure that the computer accessing the AdderView CATx IP is clean of
viruses and spyware and has up-to-date firewall and anti-virus software
loaded that is appropriately configured.
Avoid accessing the AdderView CATx IP from public computers.
Security can be further improved by using the following suggestions:
Place the AdderView CATx IP behind a firewall and use the port numbers to
route the VNC network traffic to an internal IP address.
Review the activity log from time to time to check for unauthorised use.
Lock your server consoles after they have been used.
A security white paper that gives further details is available upon request from
Adder Technology Limited.
Ports
In this configuration there should be no constraints on the port numbers
because the AdderView CATx IP will probably be the only device at that IP
address. Therefore, maintain the HTTP port as 80 and the VNC port as 5900.
Addressing
When the AdderView CATx IP is situated alongside the firewall, it will require a
public static IP address (i.e. one provided by your Internet service provider).
More addressing information:
Discover DHCP-allocated addresses
DNS addressing