Filter
Top Products
Enabling and Installing this Release 2
Version 276-05
C613-10474-00 REV D
Enabling and Installing this Release
To use this maintenance release you must have a base release license for Software Release 2.7.6. Contact your distributor or reseller for more information. To
enable this release and install it as the preferred release, use the commands:
enable rel=xx276-05.rez num=2.7.6
set install=pref rel=xx276-05.rez
where xx is the prefix to the filename, as shown in the table on page 1. For example, to install the release on an AR440S router, use the commands:
enable rel=54276-05.rez num=2.7.6
set install=pref rel=54276-05.rez
Levels
The issues addressed in this Maintenance Version include a level number. This number reflects the importance of the issue that has been resolved. The levels
are:
Level 1 This issue will cause significant interruption to network services, and there is no work-around.
Level 2 This issue will cause interruption to network service, however there is a work-around.
Level 3 This issue will seldom appear, and will cause minor inconvenience.
Level 4 This issue represents a cosmetic change and does not affect network operation.