Filter
Top Products
Features in 276-01 55
Version 276-05
C613-10474-00 REV D
CR00008742
Switch 2 Previously, if a switch port’s learn limit was changed to a number that was less
than the currently-learned number of MAC addresses, you were unable to delete
the learned MAC addresses. The switch also did not lock the port.
This issue has been resolved. The switch now deletes all learned MAC addresses
and starts learning again.
--
-YYYYYYY
CR00008791
PIM 2 Previously, Layer 2 switching of multicast traffic did not always operate correctly
when Layer 2 and Layer 3 multicast were being used at the same time.
This issue has been resolved.
--
-YY--YYY
CR00009236
BGP 2 For BGP prefixes learned from an external EBGP peer, which were subsequently
distributed within the router or switch’s own AS via Route Reflection, the
teaching time to the IBGP peers was excessively slow.
This issue has been resolved.
YY
YYY- -YYY
CR00009386
SSH 2 Previously, when the router or switch had encryption hardware installed, a slow
memory leak occurred after multiple consecutive SSH connections were
established.
This issue has been resolved.
-Y
-Y------
CR00010232
STP 2 STP and RSTP did not work correctly when a static MAC filter was added.
This issue has been resolved, so that control traffic is not incorrectly discarded in
the presence of configured switch filters. Also, configured switch filters are now
applied to locally generated control traffic.
--
-YYYYYYY
CR00010278
IP 2 Multihomed IP interface addresses could not be used as the default local IP
address.
This issue has been resolved.
YY
YYYYYYYY
CR00010307
Switch 2 Invalid entries were sometimes added to the hardware IP table.
This issue has been resolved.
--
-----YY-
CR Module Level Description
AR44xS / AR450S
AR7x5
AR750S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948
AT-9900
AT-9800