Filter
Top Products
Features in 276-04 23
Version 276-05
C613-10474-00 REV D
CR00013421
BGP 3 When a user created a BGP module trigger for the peerstate event, the router
or switch did not allow specification of the script or state parameters.
This issue has been resolved. All such generic parameters are now available with
module-specific triggers.
Y -YYY--- - -
CR00013473
CR00013516
DVMRP 3 Values for some DVMRP settings (including ttlthreshold and metric) were not
saved in the configuration file or output resulting from the commands create
config and show config dynamic. If the router or switch rebooted, the values
were not applied.
This issue has been resolved.
Y -YYY--- - -
CR00013525
Stack 3 Different versions of the management stacking feature are not compatible with
each other, which means that AT-9924Ts or x900-24XT series switches can only
be stacked with other AT-9924Ts or x900-24XT switches.
This software version includes checks to prevent incompatible software from
being stacked.
- --YYYY- - -
CR00013547
VLAN 3 When DHCP snooping was enabled on the router or switch, performing a walk
of the MIB variables in that router or switch could result in incorrect termination
of the walk. This was because certain SNMP packets were incorrectly interpreted
as DHCP packets.
This issue has been resolved.
- --YYYY- - -
CR00013714
SSH 3 The router or switch’s SSH server occasionally disconnected an SSH client because
of a checksum error. This occurred because the server did not decrypt the SSH
session key correctly.
This issue has been resolved.
Y - YYYYY- - -
CR Module Level Description
AR44xS/ AR450S
AR7x5
AR750S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948
AT-9900
AT-9800