Filter
Top Products
Chapter 3 - Commissioning
BreezeACCESS VL System Manual
72
Table 3-1: Basic Parameters
Parameter Default Value Comment
VLAN ID-Management 65535
Authentication Algorithm Open System Availability of security
parameters depends on
support according to the
country code.
Data Encryption Option Disable
Security Mode WEP
Default Multicast Key (AU) Key 1
Promiscuous Authentication (AU) Disable
Default Key (SU) Key 1
Key 1 to Key 4 00……0 (32 zeros,
meaning no key)
NOTE
Some parameters are changed to their new values only after reset (refer to Appendix E for more
details). After the basic parameters are configured, the unit should be reset in order to activate the
new configuration.
3.1.2 Country Code Selection
CAUTION
The selected Country Code must comply with applicable local radio regulations.