Filter
Top Products
Appendix E - Parameters Summary
BreezeACCESS VL System Manual
230
E.1.4 Network Management Parameters
Parameter Unit Range Default Run-Time
Access to Network
Management
AU, SU From Wireless Link Only
From Ethernet Only
From Both Ethernet and
Wireless Link
From Both Ethernet
and Wireless Link
No
Network Management
Filtering
AU, SU Disable
Activate Management IP
Filter On Ethernet Port
Activate Management IP
Filter On Wireless Port
Activate Management IP
Filter On Both Ethernet
and Wireless Ports
Disable No
Set Network Management IP
Address
AU, SU IP address 0.0.0.0
(all 10 entries)
No
Set/Change Network
Management IP Address
Ranges
AU, SU <start address> to <end
address>
or,
<base address> mask <mask>
0.0.0.0 TO 0.0.0.0
(all 10 entries)
No
Send SNMP Traps AU Disable
Enable
Disable Yes
SNPM Traps IP Destination AU IP address 0.0.0.0
(all 10 entries)
No
SNMP Traps Community AU Up to 14 printable ASCII
characters
public
(all 10 entries)
No
Wi2 IP Address SU IP address 0.0.0.0 (none) Yes
E.1.5 Bridge Parameters
Parameter Unit Range Default Run-Time
VLAN ID-Data SU 1 – 4094 1 No
VLAN ID – Management AU, SU 1 – 4094, 65535 65535 (no VLAN) No
VLAN Link Type AU, SU Hybrid Link
Trunk Link
Access Link (only in SU)
Service Provider Link
Hybrid Link No
VLAN Forwarding Support AU, SU Disable, Enable Disable No
VLAN Forwarding ID AU, SU 1 – 4094
(up to 20 entries)
Empty list No
VLAN Relaying Support AU Disable, Enable Disable No
VLAN Relaying ID AU 1 – 4094
(up to 20 entries)
Empty list No
VLAN Priority – Data SU 0 – 7 0 No
VLAN Priority –
Management
AU, SU 0 – 7 0 No
VLAN QinQ Protocol
Ethertype
AU, SU 8100 – 9000, 9100, 9200 (hex) 8100 (hex) No
Service Provider VLAN ID SU 1 – 4094 1 No