Filter
Top Products
Chapter 4 - Operation and Administration
BreezeACCESS VL System Manual
162
4.2.6.3 Network Management Parameters
The Network Management Parameters menu enables protecting the Unit from
unauthorized access by defining a set of discrete IP addresses as well as IP
address ranges from which the unit can be managed using protocols such as
Telnet, FTP, TFTP, SNMP, DHCP and ICMP. This excludes management messages
generated in the unit, such as Traps or Ping Test frames, which are not filtered.
The direction from which management access is permitted can also be
configured, which means that management access may be permitted from the
wireless medium only, from the wired Ethernet only, or from both.
The Network Management Menu also enables managing transmission of traps,
including definition of up to 10 traps destination IP addresses and the associated
community strings. In addition, the menu enables specifying the IP address of a
connected AP client device to facilitate remote management of a BreezeACCESS
WI
2
system.
The Network Management Parameters menu includes the following options:
Access to Network Management
Network Management Filtering
Set Network Management IP address
Delete a Network Management IP Address
Delete All Network Management IP Addresses
Set/Change Network Management IP Address Ranges
SNMP Traps (AU only)
Wi2 IP Address (SU only)
4.2.6.3.1 Access to Network Management
The Access to Network Management option defines the port through which the
unit can be managed. The following options are available:
From Wireless Link Only
From Ethernet Only
From Both Ethernet and Wireless Link