Filter
Top Products
Appendix E - Parameters Summary
BreezeACCESS VL System Manual
232
E.1.6 Performance Parameters
Parameter Unit Range Default Run-Time
RTS Threshold AU, SU HW Revision C or higer: 20-
4092 (bytes)
HW Revision A, B: 20-2200.
AU HW Revision A, B:
2200
AU HW Revision C or
higher (except in the
900 MHz band): 4092
AU in the 900 MHz
band: 60
SU: 60
Yes
Minimum Contention
Window
AU, SU 0, 7, 15, 31, 63, 127, 255, 511,
1023
15 No
Maximum Contention
Window
AU, SU 7, 15, 31, 63, 127, 255, 511,
1023
1023 No
Maximum Modulation
Level
AU, SU According to the Min/Max
Modulation Level defined for
the Sub-Band
5 for SUs with HW
revision F
The highest available
value for the rest of the
units
Yes
Multicast Modulation
Level
AU According to the Min/Max
Modulation Level defined for
the Sub-Band
The lowest available value Yes
Number of HW Retries AU, SU 1 - 14 10 Yes
Average SNR Memory
Factor
AU, SU -1 to 32 5 Yes
Burst Mode Option* AU, SU Disable
Enable
Enable No
Burst Mode Time
Interval*
AU, SU 1 to the value defined in the
Sub-Band for Maximum Burst
Duration (milliseconds)
5 milliseconds or the value
of Maximum Burst Duration
defined for the Sub-Band
(the lower of the two values).
Yes
Adaptive Modulation
Option
AU, SU Disable
Enable
Enable No
Minimum Interval
Between Adaptive
Modulation Messages
AU, SU 1-3600 (seconds) 4 (seconds) Yes
Adaptive Modulation
Decisión Threshold
AU, SU Normal
High
Normal No
Concatenation Option AU, SU Disable
Enable
Enable No
Maximum
Concatenated Frame
Size
AU, SU 256 to 2200 bytes for units
with HW revision A or B
256 to 4032 bytes for units
with HW revision C or
higher
2200 for units with rev A
or B
4032 for units with rev C
or higher
Yes
* Applicable only if Burst Mode is supported by the Sub-Band.