Filter
Top Products
Chapter 2 - Installation
BreezeACCESS VL System Manual
34
2.1 Installation Requirements
This section describes all the supplies required to install the BreezeACCESS VL
system components and the items included in each installation package.
NOTE
Installation requirements for SU-I are provided in section 2.5 on page 54.
2.1.1 Packing List
2.1.1.1 SU-A/E Subscriber Unit
The SU-A/E installation kit includes the following components:
IDU indoor unit with a wall mounting kit
Mains power cord
Any of the following Outdoor Units:
Table 2-1: Subscriber Unit ODU Types
SU ODU Type Description
SU-A-ODU A rectangular enclosure plus a diamond shaped vertically polarized
high-gain flat antenna integrated on the front panel (41.5 x 36.9 x 6.3
cm). Not available in the 0.9 GHz band. HW revision D or lower.
New SU-A-ODU A diamond shaped enclosure (22 x 22 x 7 cm) with a
vertically/horizontally polarized high-gain flat antenna integrated on
the front panel.
The smaller size new SU-A-ODU (HW revision E) is currently
available only in the 5.4 GHz and 5.8 GHz bands.
SU-E-ODU A rectangular enclosure (30.5 x 11.7 x 5.7 cm) with a connection to an
external antenna (not included). Not available in the 0.9 GHz band
(HW revision D or lower).
New SU-E-ODU A diamond shaped enclosure (22 x 22 x 7 cm) with a connection to an
external antenna (not included).
The smaller size new AU-E-ODU (HW revision F) is currently
available only in the 0.9 GHz band.