Filter
Top Products
Parameters Summary
BreezeACCESS VL System Manual
227
E.1.2 IP Parameters
Parameter Unit Range Default Run-Time
IP Address AU, SU IP address 10.0.0.1 No
Subnet Mask AU, SU IP address 255.0.0.0 No
Default Gateway Address AU, SU IP address 0.0.0.0 No
DHCP Option AU, SU Disable
DHCP Only
Automatic
Disable No
Access to DHCP AU, SU From Wireless Only
From Ethernet Only
From Both Wireless and
Ethernet
AU: From Ethernet Only
SU: From Wireless Only
No
E.1.3 Air Interface Parameters
Parameter Unit Range Default Run-Time
ESSID AU, SU Up to 31 printable ASCII
characters
ESSID1 No
Operator ESSID Option AU Disable
Enable
Enable No
Operator ESSID AU Up to 31 printable ASCII
characters
ESSID1 No
Best AU Support SU Disable
Enable
Disable No
Number of Scanning
Attempts
SU 1 – 255 4 No
Preferred AU MAC
Address
SU MAC Address 00-00-00-00-00-00
(no preferred AU)
No
Scanning Mode SU Passive, Active Passive No
Cell Distance Mode AU Automatic, Manual Automatic No
Maximum Cell Distance AU 0-54 (Km)
0 means no compensation
0 (no compensation)
Yes
Fairness Factor AU 0 – 100 (%) 100 (%) No
Per SU Distance
Learning
AU Disable
Enable
Disable Yes
Arbitration Inter-Frame
Spacing
AU, SU 1-50 (time slots) 2 time slots No
Wireless Trap Threshold AU 1-100 (%) 30 (%) No
Maximum Number of
Associations
AU AU-BS, AU-SA: 1-512 (1-124 if
Data Encryption Option is
enabled).
AUS-BS, AUS-SA:
1-8
AU-BS, AU-SA: 512
AUS-BS, AUS-SA:
8
Yes
Sub-Band Select* AU According to the Country Code 1 Yes
Frequency AU According to the Sub-Band The lowest frequency in
the Sub-Band
Yes
User Defined Frequency
Subsets
SU All frequencies in the available
Sub Bands
All available frequencies
in all available Sub
Bands
Yes