Filter
Top Products
Menus and Parameters
Operation and Administration
107
Show FTP Event Log File Upload Parameters: Displays the current values
of the Event Log Upload parameters.
NOTE
There is one set of general FTP parameters (FTP Server IP Address, FTP Gateway IP Address,
FTP User Name and FTP Password). This set (or relevant parts of the set) serves the SW
Download procedure, the Configuration File Upload/Download procedure and the Event Log File
Upload procedure. Changing any of these parameters in the menu for either procedure will
automatically change its value in the menu for the other procedures.
4.2.3.10 Feature Upgrade
The Feature Upgrade option enables to enter a license string for upgrading the
unit to support new features and/or options. Upon selecting the Manual Feature
Upgrade option the user will be requested to enter the license string. Each license
string is associated with a unique MAC Address and one feature/option. If the
encrypted MAC Address in the license string does not match the unit’s MAC
Address, the string will be rejected. If there is a match, a message notifying of the
new feature/option will be displayed. The unit must be reset for the change to
take effect.
The license string comprises 32 to 64 hexadecimal digits.
NOTE
If you are entering the license string using copy and paste operation, check carefully that the string
is copied properly. You may have to enter it manually due to potential problems in performing copy
and paste in Telnet.
New Feature License files can be uploaded remotely using TFTP (see Appendix B).
4.2.3.11 SW Version Download
The SW Version Download submenu enables the optional downloading of a SW
Version file from a remote FTP server. The SW Version Download submenu
includes the following options:
Execute FTP GET SW Version: The Execute FTP GET SW Version option
executes the SW Version FTP download according to the parameters defined
below.
FTP SW Source Dir: The FTP SW Source Dir option enables defining the
source directory of the SW version file.
Valid values: A string of up to 80 printable ASCII characters. To clear the field
press "."
The default is an empty string.