Filter
Top Products
Parameters Summary
BreezeACCESS VL System Manual
233
E.1.7 Service Parameters
Parameter Unit Range Default Run-Time
User Filtering Option SU Disable
IP Protocol Only
User Defined Addresses
Only
PPPoE Protocol Only
Disable Yes
Set/Change Filter IP Address
Ranges
SU <start address> to <end
address>
or,
<base address> mask <mask>
0.0.0.0 TO 0.0.0.0
(all 8 entries)
No
DHCP Unicast Override Filter SU Disable DHCP Unicast
Enable DHCP Unicast
Disable DHCP
Unicast
Yes
MIR: Downlink SU SU-3: 128-3072 (Kbps)
SU-6: 128-6016 (Kbps)
SU-8: 128-13440 (Kbps)
SU-54: 128-53888 (Kbps)
SU-I: 128-6016 (Kbps)
SU-3: 3072
SU-6: 6016
SU-8: 13440
SU-54: 53888
SU-I: 6016
Yes
MIR: Uplink SU SU-3: 128-2048 (Kbps)
SU-6: 128-4096 (Kbps)
SU-8: 128-13440 (Kbps)
SU-54: 128-53888 (Kbps)
SU-I: 128-4096 (Kbps)
SU-3: 2048
SU-6: 4096
SU-8: 13440
SU-54: 53888
SU-I: 4096
Yes
CIR: Downlink SU SU-3: 0-2048 (Kbps)
SU-6: 0-4096 (Kbps)
SU-8: 0-11264 (Kbps)
SU-54: 0-45056 (Kbps)
SU-I: 0-6016 (Kbps)
0 (Kbps Yes
CIR: Uplink SU SU-3: 0-2048 (Kbps)
SU-6: 0-4096 (Kbps)
SU-8: 0-11264 (Kbps)
SU-54: 0-45056 (Kbps)
SU-I: 0-4096 (Kbps)
0 (Kbps) Yes
Maximum Delay SU 300 – 10,000 (ms) 5,000 (ms) Yes
Maximum Burst Duration AU, SU 0 – 2,000 (ms) 5 (ms) No
Graceful Degradation Limit AU 0 – 70 (%) 70 (%) No
MIR Only Option AU Disable
Enable
Enable No
MIR Threshold Percent AU 0 – 100 (%) 50 (%) Yes
VLAN Priority Threshold AU, SU 0 – 7 7 No
ToS Prioritization Option AU, SU Disable
Enable IP Precedence
(RFC791) Prioritization
Enable DSCP (RFC2474)
Prioritization
Disable No
IP Precedence Threshold AU, SU 0 – 7 4 No
DSCP Threshold AU, SU 0 – 63 32 No
UDP/TCP Port Ranges
Prioritization Option
AU, SU Disable
Enable Only for UDP
Enable Only for TCP
Enable for both UDP and
TCP
Disable No
UDP RTP/RTCP
Prioritization
AU, SU RTP & RTCP
RTP Only
RTP & RTCP No