Filter
Top Products
Appendix E - Parameters Summary
BreezeACCESS VL System Manual
234
Parameter Unit Range Default Run-Time
TCP RTP/RTCP Prioritization AU, SU RTP & RTCP
RTP Only
RTP & RTCP No
Low Priority Traffic Minimum
Percent
AU, SU 0 – 100 (%) 0 (%) Yes
Wireless Link Prioritization
Option*
AU Disable
Enable
Disable Yes
Low Priority AIFS* AU 3-50 3 Yes
Number of HW Retries for
High Priority Traffic*
AU 1-14 10 Yes
Number of HW Retries for
Low Priority Traffic*
AU 1-14 10 Yes
AU Burst Duration for High
Priority Traffic*
AU 0-40 (in 0.25 milliseconds units) 16 (4 milliseconds) Yes
AU Burst Duration for Low
Priority Traffic*
AU 0-40 (in 0.25 milliseconds units) 20 (5 milliseconds) Yes
SU Burst Duration for High
Priority Traffic*
AU 0-40 (in 0.25 milliseconds units) 8 (2 milliseconds) Yes
SU Burst Duration for Low
Priority Traffic*
AU 0-40 (in 0.25 milliseconds units) 20 (5 milliseconds) Yes
DRAP Support AU Disable
Enable
Enable No
UDP Port AU 8000–8200 8171 No
Maximum Number Of Voice
Calls
AU 1–255 40 No
DRAP TTL AU 1–255 (seconds) 10 (seconds) No
* Wireless Link Prioritization parameters are applicable only for units with a license for this
feature
E.1.8 Security Parameters
Parameter Unit Range Default Run-Time
Authentication Algorithm* AU, SU Open system
Shared Key
Open system No
Data Encryption Option* AU, SU Disable
Enable
Disable No
Security Mode* AU, SU WEP
AES OCB
FIPS-197**
WEP No
Default Key SU 1-4 1 No
Default Multicast Key AU 1-4 1 No
Key # 1 to Key # 4 AU, SU 32 hexadecimal digits 0…0 (all 0=no key) No
Promiscuous Authentication AU Disable
Enable
Disable Yes
(Disable
after reset)
* Applicable only if supported by the Sub-Band.
** The FIPS-197 option is available only in units with HW revision C or higher that have the
applicable license.