Filter
Top Products
Menus and Parameters
Operation and Administration
97
Change Unit Name
Change Password
Flash Memory Control
Log Out Timer
Ethernet Negotiation Mode
Change System Location
Event Log Menu
Feature Upgrade
SW Version Download
Configuration File Upload/Download
4.2.3.1 Reset Unit
The Reset Unit option enables resetting the unit. After reset, any modifications
made to the system parameters are applied.
4.2.3.2 Default Settings
The Set defaults submenu enables resetting the system parameters to a
predefined set of defaults or saving the current configuration as the set of
Operator Defaults.
The Default Setting options are available only to users with Administrator access
rights.
The available options are:
Set Defaults
Save Current Configuration As Operator Defaults
4.2.3.2.1 Set Defaults
The Set Defaults submenu enables reverting the system parameters to a
predefined set of defaults. There are two sets of default configurations:
A Factory Defaults: This is the standard default configuration.