Filter
Top Products
Controller Installation
007-5510-002 25
2. Check to ensure that the LUN Zoning chart is empty (Figure 2–11).
Figure 2–11 LUN Zoning Screen
To add a user:
1. Type:
user audit=on
<Enter>
The controller reports which users are connected.
2. Type:
user add
<Enter>
.
3. Specify a new Host User’s world wide name, enter
s.
4. Specify a 64-bit world wide name or GUID, taken from the list of available anonymous users.
5. Enter an alias name for the user. The name may contain up to 12 characters. Type in a name and
press
<Enter>
.
6. Host users can have their port access zoned. Enter
y to specify host port zoning.
7. For Unit 1, enter each active port on a new line and then exit. For this example, type:
1
<Enter>
4
<Enter>
e
<Enter>
8. For Unit 2, enter each active port on a new line and then exit. For this example, type:
1
<Enter>
4
<Enter>
e
<Enter>
Host users are limited to accessing specific LUNs, as follows:
• a host user may have its own unique LUN mapping, or
• a host user may use the anonymous LUN mapping.
The anonymous user LUN mapping is handled by the port ZONING command. In either case, the LUN
mapping applies on all the ports for which the user has been zoned.
9. Enter
y to specify the unique LUN mapping (Table 2–2).
LUN Zoning
-----------------------------------------------------------------------------
15000 [1]: zoning
World Wide NamePort External LUN, Internal LUN
1 21000001FF040004
2 22000001FF040004
3 23000001FF040004
4 24000001FF040004