APC 15000 RAID Power Supply User Manual


 
Controller Management
007-5510-002 73
3.4.1 Monitoring User Logins
The AUDIT function continuously monitors logins to the controller and provides alerts in the event of
unauthorized login attempts (Figure 3–47
).
Figure 3–47 User Login Messages
USER AUDIT=ON|OFF enables/disables the user auditing function. When enabled, the system will
display a message when a user logs in or out. Default is OFF.
USER CONNECTIONS displays a list of all the currently connected users and the host port to which the
user is connected (Figure 3–48)
.
Figure 3–48 User Connections Screen
3.4.2 Zoning (Anonymous Access)
This type of configuration provides the first-level protection. The LUN identification scheme can be
customized for each host port. Any unauthorized user accessing the controller will be considered
“anonymous” and granted the zoning rights for the host port to which they are connected.
The ZONING command will display the current settings for the host ports
. The LUN Zoning chart
indicates which internal LUNs the users will be able to access (with Read-only and Read/Write
privileges) and where the internal LUN will appear to the users. In Figure 3–49, only internal LUN 1
can be accessed and it is read-only. It will appear as LUN 0 to the users.
Figure 3–49 Current Zoning Configuration Screen
ZONING EDIT lets you change the settings for the host ports. You will be asked to select a host port to
change and enter the mapping for each LUN
(Figure 3–50). The default configuration is to deny access
to all the LUNs.
ZONING DEFAULT restores the zoning of a host port back to its default settings.
Host Int 15:04:07 User Logout Client1, port:4 S_ID:000004
Host Int 15:04:47 Authenticated Login Client10, port:3 S_ID:000002