Filter
Top Products
Quitting SCSI disk mode
1. Shut down the desktop Macintosh.
2. Press the power button on the back of the PowerBook
to turn it off.
3. Turn off any other SCSI devices in the chain.
4. Disconnect the PowerBook from the adapter cable.
If you regularly plan to connect your PowerBook to the same
desktop Macintosh, you can leave the adapter cable attached
to the SCSI chain on the desktop Macintosh. See “Simplifying
the SCSI Disk Connection Process,” earlier in this chapter.
Important: If you leave the adapter cable attached to the
PowerBook, the computer will behave as though it is still in
SCSI disk mode when you try to restart.
5. Disconnect the cables from the desktop Macintosh.
Your equipment is now ready for normal use. Make sure that the
SCSI devices connected to the desktop Macintosh are properly
terminated.
Chapter 14: Expanding Your Computer System 235