Filter
Top Products
4 Follow the instructions in “Replacing the Controller Board”
on page 21, being careful to follow the directions for elimi-
nating electrostatic buildup.
Increasing the Disk Cache Size
If your printer has 8 MB of RAM total, you must set the disk cache
to a minimum of 48 KB (Administration/Memory/Disk Cache menu) to
use the Intellifont SIMM.
» Note:
You may need to decrease one of the other memory clients
before increasing the disk cache client, or add more memory.
If your printer has more than 8 MB RAM, the size of the disk cache
is automatically adjusted.
Verifying the Installation
Once you have installed the Intellifont SIMM, print a start-up page
and an advanced status page to verify the installation.
1 Wait for the printer message window to display IDLE.
2 If necessary, use the Administration/Startup Options/Startup
Page menu to enable start-up pages.
3 Turn the printer off and back on again.
In the Options section of the start-up page, a new option identi-
fied as %cartridge2% verifies the installation of the SIMM.
4 Use the Administration/Special Pages/Status Page Type
menu to change the default Standard setting to Advanced.
5 Print an Advanced Status Page (Administration/Special
Pages/Status Page Type selection, followed by Administra-
tion/Special Pages/Print Status).
The list of HP PCL fonts includes all of the new Intellifont fonts.
Keep this status page for reference when accessing these fonts.