Filter
Top Products
Downloading System Software to a
Functional Printer—SYSTEMDL.PS
If the print system software is non-functional (the printer can’t start
up), go to “Downloading System Software to a Non-Functional
Printer” on page 56.
If the print system software is functional (the printer starts up nor-
mally, and IDLE displays in the message window), and if you decom-
pressed the file SYSTEMDL.PS in the previous section, use these
instructions.
Ensure that the system software is decompressed, as described
in the previous section.
Turn on the printer, wait for IDLE to appear in the message win-
dow, and then print an advanced status page.
This procedure may change the current configuration settings.
The advanced status page provides a record of all current config-
uration settings, so you can verify them, and reconfigure them, if
necessary, after the system software has been updated.
Ensure that the Administration/Communications/
Interface
/Emula-
tion menu (where
Interface
is the interface you plan to use to
download the system software), is set to ESP or PostScript.
Ensure that the printer is on line and idle.