Filter
Top Products
RX3141 User’s Manual Chapter 2 Getting to Know
9
2.5 Placement Options
Depending on your environment, you may choose one of the three supported placement options for RX3141 –
desktop placement, magnet mount and wall mount.
2.5.1 Desktop Placement
You may place RX3141 on any flat surface. The space-saving design of RX3141 occupies only a small area
on your desk.
2.5.2 Magnet Mount Instructions
Place RX3141 onto any metal surface that attracts magnet, such as most desktop computer housings,
cabinets and etc.
2.5.3 Wall Mount Instructions:
1. Attach two screws on the wall, separated by 115mm if you want the front or rear panel facing
upward, 76mm if you want left or right side facing upward. Make sure that the two screws are
leveled. Note that there are four wall mount slots and you may choose any adjacent slots for wall
mounting.
2. Line up the wall mount slots with the screws and maneuver RX3141 so that both screws are
inserted into the wall mount slots as indicated in the following figures.
Line up the wall mount slots w/ both screws.
115mm or 76mm
Screws
Wall
mount
slots
Screws
Wall
mount
slots
Maneuver the switch so that both screws
are inserted into the wall mount slots.