RX3141 User’s Manual Chapter 3. Quick Start Guide
17
Figure 3.3. System Status Page
4. Follow the instructions described in Chapter 5 "Router Connection Setup” to set up the LAN and
WAN settings for RX3141.
After completing the basic configuration for RX3141, read the following section to determine if you can access
the Internet.
3.3.2 Testing Your Setup
At this point, the RX3141 should enable any computers on your LAN to use the RX3141’s ADSL or cable
modem connection to access the Internet.
To test the Internet connection, open your web browser, and type the URL of any external website (such as
http://www.asus.com
). The LED labeled WAN should be blinking rapidly and may appear solid as the
device
connects to the site. You should also be able to browse the web site through your web browser.
If the LEDs do not illuminate as expected or the web page does not display, see Appendix 13 for
troubleshooting suggestions.