Filter
Top Products
Chapter 7. Configuring Static Routes RX3141 User’s Manual
42
7.2.3 Deleting Static Routes
Figure 7.3. Sample Routing Table
Follow these instructions to delete a static route from the routing table.
1. Open the Static Route configuration page by double clicking the
Advanced
Î
Static Route
menu.
2. Click on the
icon of the route to be deleted in the Routing Table.
WARNING
Do not remove the route for default gateway unless you know
what you are doing. Removing the default route will render the
Internet unreachable.
7.2.4 Viewing the Static Routing Table
All IP-enabled computers and routers maintain a table of IP addresses that are commonly accessed by their
users. For each of these destination IP addresses, the table lists the IP address of the first hop the data should
take. This table is known as the device’s routing table.
To view the RX3141’s routing table, double click the
Advanced
Î
Static Route
menu. The Routing Table
displays at the upper half of the Static Route Configuration page, as shown in Figure 7.1:
The Routing Table displays a row for each existing route containing the IP address of the destination network,
subnet mask of destination network and the IP of the gateway that forwards the traffic.