Filter
Top Products
RX3141 User’s Manual Chapter 9. Configuring Firewall/NAT Settings
59
2. Click on the icon of the rule to be modified in the outbound ACL table or select the rule number
from the “
ID
” drop-down list.
3. Make desired changes to any or all of the following fields: action, source/destination IP,
source/destination port, protocol, ICMP message type and log. Please see Table 9.3 for
explanation of these fields.
4. Click on the
button to modify this ACL rule. The new settings for this ACL rule will
then be displayed in the outbound access control list table at the bottom half of the Outbound
ACL Configuration page.
9.5.3 Delete Outbound ACL Rules
To delete an outbound ACL rule, just open the Outbound ACL Rule configuration page by double clicking the
Router Setup
Î
Outbound ACL
menu and then click on the in front of the rule to be deleted:
9.5.4 Display Outbound ACL Rules
Open the Outbound ACL Rule configuration page by double clicking the
Router Setup
Î
Outbound ACL
menu.
9.6 Configuring Self-Access ACL Rules – (Router Setup Î Self-Access ACL)
Self-Access rules control access to/from the RX3141 itself. You may use Self-Access Rule Configuration page,
as illustrated in Figure 9.8, to:
f Add a Self-Access rule
f Modify an existing Self-Access rule
f Delete an existing Self-Access rule
f View existing Self-Access rules