Filter
Top Products
RX3141 User’s Manual Chapter 7. Configuring Static Routes
41
7.2.2 Adding Static Routes
Figure 7.2. Static Route Configuration
Follow these instructions to add a static route to the routing table.
1. Open the Static Route configuration page by double clicking the
Advanced
Î
Static Route
menu.
2. Enter static routes information such as destination IP address, destination subnet mask, gateway
IP address and the interface in the corresponding fields.
For a description of these fields, refer to Table 7.1. Static Route Configuration Parameters.
To create a route that defines the default gateway for your LAN, enter 0.0.0.0 in both the
Destination
IP Address
and
Subnet Mask
fields.
3. Click
to add a new route.