Filter
Top Products
5. The WinClient Viewer
87
RGB Drag the slider bars to adjust the RGB (Red, Green, Blue)
values. When an RGB value is increased, the RGB component of
the image is correspondingly increased.
If you enable Set to Grayscale, the remote video display is
changed to grayscale.
Gamma This section allows you to adjust the video display's gamma
level. This function is discussed in detail in the next section,
Gamma Adjustment.
Performance Select the type of internet connection that exists between the
Local Client computer and the CN8000. The CN8000 will use that
selection to automatically adjust the Video Quality and Detect
Tolerance settings to optimize the quality of the video display.
Since network conditions vary, if none of the pre-set choices
seem to work well, you can select Customize and use the Video
Quality and Detect Tolerance slider bars to adjust the settings to
suit your conditions.
Video Quality Drag the slider bar to adjust the overall Video Quality. The larger
the value, the clearer the picture and the more video data goes
through the network. Depending on the network bandwidth, a
high value may adversely effect response time.
Enable Refresh
The CN8000 can redraw the screen every 1 to 99 seconds,
eliminating unwanted artifacts from the screen. Select Enable
Refresh and enter a number from 1 through 99. The CN8000 will
redraw the screen at the interval you specify. This feature is
disabled by default. Click to put a check mark in the box next to
Enable Refresh to enable this feature.
Note: 1. The switch starts counting the time interval when
mouse movement stops.
2. Enabling this feature increases the volume of video
data transmitted over the network. The lower the
number specified, the more often the video data is
transmitted. Setting too low a value may adversely
affect overall operating responsiveness.
Color Depth Control This setting determines the richness of the video display by
adjusting the amount of color information.
Detect Tolerance This setting also relates to video quality. It governs detecting or
ignoring pixel changes. A high setting can result in a lower quality
display due to less data transfer. A lower setting will result in
better video quality, but setting the threshold too low may allow
too much data to be transferred, negatively impacting network
performance.
Option Usage