Filter
Top Products
CN8000 User Manual
42
5. Select the report options you would like sent. Choices include: Report IP
address, Report system reboot, Report user login and Report user logout.
Log Server
Important transactions that occur on the CN8000, such as logins and internal
status messages, are kept in an automatically generated log file. See Chapter 7,
The Log Server, for details on setting up the log server.
Specify the MAC address of the computer that the Log Server runs on in
the MAC address field.
Specify the port used by the computer that the Log Server runs on to listen
for log details in the Service Port field. The valid port range is 1–65535.
The default port number is 9001.
Note: The port number must be different than the one used for the
Program port (see Program, page 38).
SNMP Server
To be notified of SNMP trap events, do the following:
1. Check Enable SNMP Agent.
2. Key in the Server IP address and Service Port number of the computer to
be notified of SNMP trap events. The valid port range is 1-65535.
Note: The following SNMP trap events are sent: System Power On, Login
Failure, and System Reset.