1. Introduction
7
Cables
Two custom KVM cable sets (1 USB; 1 PS/2) to link the CN8000 to a
server or KVM switch are provided with this package.
Custom KVM cable sets are available in various lengths, as shown in the
table below:
To purchase additional cable sets, contact your dealer.
One custom Console cable set to link the CN8000 to a local console is
provided with this package.
Note: This cable set has been designed to operate with either PS/2 or USB
consoles.
A USB 2.0 cable for use with the Virtual Media function (see Virtual
Media Port, page 11) is provided with this package.
Cat 5e or higher Ethernet cable (not provided with this package), should be
used to connect the CN8000 to the LAN, WAN, or Internet.
Cable Type Length CS Part Number
PS/2 1.2 m 2L-5201P
1.8 m 2L-5202P
1.8 m 2L-5702P
3.0 m 2L-5203P
6.0 m 2L-5206P
USB 1.2 m 2L-5201U
1.8 m 2L-5202U
3.0 m 2L-5203U
5.0 m 2L-5205U