Filter
Top Products
CN8000 User Manual
10
Components
Front View
No. Component Description
1 LAN Port The Cat 5e cable that connects the CN8000 to the LAN, WAN,
or Internet plugs in here.
2Firmware
Upgrade/Reset
Switch
1. Pressing and releasing this switch performs a CN8000
system reset. (See Erratic operation, page 179.)
2. Pressing and holding this switch for more than three
seconds returns the CN8000 to its factory default
configuration settings.
3. Pressing and holding this switch while powering on the
switch returns the CN8000 to its factory default firmware
level. This operation should only be performed in the event
of a firmware upgrade failure that results in the device
becoming inoperable.
Note: This switch is recessed and must be pushed with a thin
object - such as the end of a paper clip, or a ballpoint pen.
3 10/100 Mbps
LED
The LED lights ORANGE to indicate 10 Mbps data
transmission speed. It lights GREEN to indicate 100 Mbps
data transmission speed.
4 Link LED Flashes GREEN to indicate that a Client program is accessing
the device.
5 Power LED Lights ORANGE when the CN8000 is powered up and ready
to operate.
1
2
3
4
5