Filter
Top Products
CN8000 User Manual
6
System Requirements
Remote User Computers
Remote user computers (also referred to as client computers) are the ones the
users log into the switch with from remote locations over the internet (see
Terminology, page xiii). The following equipment must be installed on these
computers:
For best results we recommend that the computers used to access the
switch have at least a P III 1 GHz processor, with their screen resolution
set to 1024 x 768.
Browsers must support 128 bit SSL encryption.
For best results, a network transfer speed of at least 128 kbps is
recommended.
For the Windows Client AP, at least 25 MB of memory must be available
after installation.
For the Java Client AP, the latest version of Sun's Java Runtime
Environment (JRE) must be installed, and at least 55 MB of memory must
be available after installation.
For the browser-based WinClient Viewer, at least 60 MB of memory must
be available after installation.
For the browser-based Java Applet Viewer the latest version of Sun's Java
Runtime Environment (JRE) must be installed, and at least 130 MB of
memory must be available after installation.
For the Log Server, you must have the Microsoft Jet OLEDB 4.0 or higher
driver installed.
Servers
Servers are the computers connected to the switch via KVM Cables (see
Terminology, page xiii). The following equipment must be installed on these
servers:
A VGA, SVGA or multisync port
For USB KVM Cable Connections: a Type A USB port and USB host
controller
For PS/2 KVM Cable Connections: 6-pin Mini-DIN keyboard and mouse
ports