Filter
Top Products
CN8000 User Manual
146
The Permission Attribute Value
The attribute value for permission is made up of two parts: 1) the IP address of
the CN8000 a user will access; and 2) a string that indicates the access rights
the user has on the CN8000 at that IP address. For example:
192.168.0.80&c,w,j;192.168.0.188&v,l
The makeup of the permission entry is as follows:
An ampersand (&) connects the CN8000’s IP with the access rights string.
The access rights string is made up of various combinations of the
following characters: c w j p l v s. The characters can be entered in upper
or lower case. The meanings of the characters is provided in the
Permission String Characters table, below.
The characters in the access rights string are separated by a comma (,).
There are no spaces before or after the comma.
If a user has access rights to more than one CN8000, each permission
segment is separated by a semicolon (;). There are no spaces before or
after the semicolon.
Permission String Characters
Character Meaning
C Grants the user administrator privileges, allowing the user to configure the
system.
W Allows the user to access the system via the Windows Client program.
J Allows the user to access the system via the Java applet.
P Allows the user to Power On/Off, Reset devices via an attached PN0108.
L Allows the user to access log information via the user's browser.
V Limits the user's access to only viewing the video display.
S Allows the user to use the Virtual Media function – Read Only.
M Allows the user to use the Virtual Media function – Read/Write.
T Allows the user to access the system via Telnet.
H Allows the user to access the system via SSH.
A Allows the user to Allows the user to access the system via Telnet and SSH.