Filter
Top Products
CN8000 User Manual
38
Service Ports
If a firewall is being used, the Administrator can specify the port numbers that
the firewall will allow (and set the firewall accordingly). If a port other than the
default is set, users must specify the port number as part of the IP address when
they login from a WinClient or Java Client AP program. If not, an invalid port
number (or no port number) is specified, the CN8000 will not be found.
An explanation of the fields is given in the table below:
Note: 1. Valid entries for all of the Service Ports are from 1–65535.
2. The service ports cannot have the same value. You must set a
different value for each one.
3. If port numbers are not set to the default value, any user trying to
access the CN8000 from a Windows Client AP, Java Client AP, third
party SSH or Telnet viewer, or via web browser will need to specify
the new port number for access.
Field Explanation
HTTP The port number for a browser login. The default is 80.
HTTPS The port number for a secure browser login. The default is 443.
Telnet Port The port for Telnet access. The default is 23.
Program This is the port number for connecting to the CN8000 from the
Windows Client and Java Applet Viewers, and from the Windows
and Java AP programs. The default is 9000.
Virtual Media This is the port number used for data transfer using the CN8000’s
virtual media feature. Valid entries are from 1–65535. The default is
9003.
SSH Port The port for SSH access. The default is 22.