Filter
Top Products
3. Browser Login
21
6. Provide the Network Configuration parameters explained below, and click
Next:
IP Address
The CN8000 can either have its IP address assigned dynamically (DHCP), or
it can be given a fixed IP address.
For dynamic IP address assignment, select the Obtain an IP address
automatically, radio button. (This is the default setting.)
To specify a fixed IP address, select the Set IP address manually, radio
button and fill in the IP address, Subnet Mask, and Default Gateway.
Note: 1. If you choose Obtain IP address automatically, when the switch starts
up it waits to get its IP address from the DHCP server. If it hasn’t
obtained the address after one minute, it automatically reverts to its
factory default IP address (192.168.0.60).
2. If the CN8000 is on a network that uses DHCP to assign network
addresses, and you need to ascertain its IP address, see IP Address
Determination, page 165, for information.