Filter
Top Products
Chapter 2 Avaya C460 CLI Commands
102 Avaya C460 Reference Guide
set port dot1x max-req
User level: admin.
Use the set port dot1x max-req command to set the maximal number of times
the port tries to retransmit requests to the Authenticated Station before the session is
terminated.
The syntax for this command is:
set port dot1x max-req
<module/port> <count>
Example:
set port dot1x port-control
User level: admin.
Use the set port dot1x port-control command to set the dot1x parameter
per port.
The syntax for this command is:
set port dot1x port-control <module/port> <mode>
Example:
module/
port
Module and port number.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
count Number of attempts – 1 to 10
C460-1(super)# set port dot1x max-req 1/2 5
module/
port
Module and port number.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
mode • force-unauthorize - the port is always is blocking state
• auto - forwarding/blocking depends on authorization outcome
• force-authorize - the port is always in forwarding state
C460-1(super)# set port dot1x port-control 2/3 force-
authorize
port 1/2 control was set to force-authorize