Filter
Top Products
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 87
• When a RADIUS server is not defined:
set dot1x tx-period
User level: supervisor
Use the set dot1x tx-period command to set the time interval between
attempts to access the Authenticated Station.
The syntax for this command is:
Example:set dot1x tx-period <Seconds>
set icmp-redirect
User level: read-write, admin.
Use the set icmp-redirect CLI command to accept or reject incoming ICMP-redirect
requests.
The syntax for this command is:
set icmp-redirect {accept|reject}
Example:
C460-1(super)# set dot1x system-auth-control enable
*** Warning : Authentication server ( RADIUS ) is disabled/
not-exist and so,
*** no authentication can be made
dot1x system-auth-control enabled
Seconds Interval in seconds
C460-1(super)# set dot1x tx-period 90
Done!
Accept Accept inoming ICMP-redirect requests
Reject Reject incoming ICMP-redirect requests
C460-1# set icmp-redirect accept
Done!