Filter
Top Products
Chapter 2 Avaya C460 CLI Commands
196 Avaya C460 Reference Guide
Example:
show port point-to-point status
User level: read-only, read-write, admin.
Use the show port point-to-point status command to show the port’s
point-to-point admin and operational RSTP status.
The syntax for this command is:
show port point-to-point status <module/port>
Example:
C460-1> show port mirror
port mirroring
--------------
Mirroring both Rx and Tx packets from port 3/2 to port 4/4
is enabled
C460-1> show port mirror
port mirroring
--------------
No ports are mirrored
module
(Optional)
Number of the module (3-6). If you do not specify a number, all
modules are shown.
port
(Optional)
Number of the port on the module. If you do not specify a
number, all ports on the specified module are shown.
C460-1> show port point-to-point status
Port point-to-point admin state point-to-point oper state
------- ---------------------------- --------------------------
1/1 auto point to point connection
1/2 auto point to point connection
1/3 auto point to point connection
1/4 auto point to point connection
1/5 auto point to point connection
1/6 auto point to point connection
1/7 auto point to point connection