Filter
Top Products
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 205
Example:
show rmon2 dscp-stats
User level: read-only, read-write, admin.
Use the show rmon2 dscp-stats command to display the DSCP distribution
(routed traffic only) for the RMON2 application.
The syntax for this command is:
show rmon2 dscp-stats
Example:
C460-1> show rmon statistics
Statistics for switch is active,owned by Monitor
Monitors ifEntry.1.1026 which has
Received 26375085 octets, 222536 packets,
154821 broadcast and 53909 multicast packets,
0 undersize and 0 oversize packets,
0 fragments and 0 jabbers,
1 CRC alignment errors and 0 collisions,
# of dropped packet events (due to a lack of resources): 0
# of packets received of length (in octets):
64:94530, 65-127:85124, 128-255:25896,
256-511:10440, 512-1023:6057, 1024-1518:489
Router-1> show rmon2 dscp-stats
DSCP Value Total Packets Total Octets Utilization
---------- -------------- -------------- -----------
3 7620262 487696768 59.99%
7 5080185 325131840 40.00%
---------- -------------- -------------- -----------
Total 12700447 812828608 99.99%