Filter
Top Products
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 191
show port dot1x
User level: read-only, read-write, admin.
Use the show port dot1x command to display all the configurable values
associated with the authenticator port access entity (PAE) and backend
authenticator.
The syntax for this command is:
show dot1x [mod]/[port]
Example:
mod
(Optional)
Number of the module.
port
(Optional)
Number of the port on the module, or range of ports.
C460-1> show port dot1x 3/3
Port Auth BEnd Port Port Re Quiet ReAuth Server Supp Tx Max
Number State State Control Status Auth Priod Priod Tmeout Tmeout Priod Req
------ -------- ------ -------- ------ ---- ----- ------ ------ ------ ----- ---
1/3 Init Init Auto Unauth Disa 60 3600 30 30 30 2
module Number of the module (3-6). If you do not
specify a number, the ports on all the modules
are shown.
port
(Optional)
Number of the port on the module. If you do
not specify a number, all the ports on the
module are shown.
You can also specify a range of ports
separated by a dash, for example, 4/5-13 for
ports 5 to 13 on module 4.
Auth State The Port Access Entity state. Possible states
include:
• Initialize
•Disconnected
• Connecting
• Authenticating
• Authenticated
•Aborting
•Held
•ForceAuth
•ForceUnauth