Filter
Top Products
Chapter 2 Avaya C460 CLI Commands
160 Avaya C460 Reference Guide
show ip interface brief
User level: read-only, read-write, admin.
Use the show ip interface brief command to display brief information for
an IP interface.
The syntax for this command is:
show ip interface brief [<interface> | <vlan> | <IP addr>]
Example:
show ip ospf
User level: read-only, read-write, admin.
Use the show ip opsf command to displays general information about OSPF
routing.
The syntax for this command is:
show ip ospf
Example:
interface The name of the interface whose information you
want to display - a string of up to 32 characters.
vlan The name or ID of the VLAN over which there are
interfaces you want to display - a string of up to 32
characters.
IP addr The IP address of the interface whose information
you want to display.
Router-1> show ip interface brief
Showing 1 Interfaces
Interface Address Mask Status
-------------------- --------------- --------------- --------------------
net 149.49.54.56 255.255.255.0 up
Router-1> show ip ospf