Filter
Top Products
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 159
show ip interface
User level: read-only, read-write, admin.
Use the show ip interface command to display information for an IP interface.
The syntax for this command is:
show ip interface [<interface-name>]|<ip-address>|<vlan>]
Example:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
interface-name The name of the interface whose information you
want to display.
ip-address The IP address of the interface whose information
you want to display.
vlan The name or ID of the VLAN over which there are
interfaces you want to display.
Router-1> show ip interface
Showing 2 Interfaces
mgmt is administratively up
On vlan Default
Internet address is 10.49.54.14 , subnet mask is
255.255.255.0
Broadcast address is 10.49.54.255
Directed broadcast forwarding is disabled
Proxy ARP is disabled
baba is administratively down
On vlan v2
Internet address is 192.168.0.14 , subnet mask is
255.255.0.0
Broadcast address is 192.168.255.255
Directed broadcast forwarding is disabled
Proxy ARP is disabled