Filter
Top Products
Chapter 2 Avaya C460 CLI Commands
220 Avaya C460 Reference Guide
Example:
show time
User level: read-only, read-write, admin.
Use the show time command to display the current C460 time and timezone.
The syntax for this command is:
show time
Example:
show time parameters
User level: read-only, read-write, admin.
Use the show time parameters command to display the time status and
parameters.
The syntax for this command is:
show time parameters
Example:
C460-1> show tftp upload status 1
Module : 1
Source file : C460-config
Destination file : c:\conf.cfg
Host : 149.49.36.200
Running state : Executing
Failure display : (null)
Last warning : No-warning
C460-1> show time
10:32:34 27 JAN 2000 GMT
C460-1> show time parameters
Client status: Enabled
Current time : L:00:57:19 01 JAN 1970 GMT
Timezone set to 'GMT', offset from UTC is 0 hours
Time-Server : 0.0.0.0 (I.e. broadcast address)
Time acquired from Time-Server: 0.0.0.0
Time protocol set to : TIME protcol