Filter
Top Products
34 DCS-200 • User’s Guide
4. Operation
Control Overview
`çåíêçä=lîÉêîáÉï
There are several ways to control the DCS-200:
• The front panel is ideal for all basic operations. Available controls include the
Display Section and the buttons in the Inputs Section and the Effects Section.
• The built-in web-based GUI is ideal for intuitive point-and-click operations. Refer
to Chapter 5, “GUI Operations” on page 103 for additional details.
• The DCS-200 can also be controlled remotely via Ethernet or Serial
communications. See Appendix B “Remote Control” on page 127 for additional
details.
mçïÉêJré=fåáíá~äáò~íáçå
After connecting power to the DCS-200, locate the power switch on the back of the chassis,
and turn power ON. While the system is initializing, the following messages are displayed:
Figure 4-1. System Initialization Message 1 (sample)
Figure 4-2. System Initialization Message 2 (sample)
Figure 4-3. System Initialization Message 3 (sample)
DCS-200
Barco
Initializing...
Program Loading
please wait...
Transferring to
main program.