Filter
Top Products
DCS-200 • User’s Guide 53
4. Operation
Using the Setup Menu
The selectable values are:
• Analog Sync — This field sets the analog output sync polarity.
~ Values: -H-V, -H+V, +H-V, +H+V
~ Default: -H-V
• DVI Sync — This field sets the DVI output sync polarity.
~ Values: -H-V, -H+V, +H-V, +H+V
~ Default: +H+V
p~îÉ=EmêÉîáÉïF
After you make changes using the Preview Menu, use the Save function to store them in
non-volatile memory. Your configuration parameters will then persist across power cycles.
If you do not choose Save after making changes, you are prompted to do so with a
message like the one shown in the following illustration.
Figure 4-21. Save Preview Configuration Prompt (sample)
• Press SEL to save your changes.
• Press ESC to continue without saving your changes.
If you do not save your changes, your settings will not be restored the next time the system
is powered up or the input is selected.
fåéìí=jÉåì
From the Setup Menu, select Input to display the Input Menu. The Input Menu enables
you to set parameters for the selected input on Program.
Save Preview Config?
<SEL> = Yes
<ESC> = No
Important
The Input Menu does not appear in the menu tree when the
LOGO is on Program.