Filter
Top Products
46 DCS-200 • User’s Guide
4. Operation
Using the Setup Menu
rëáåÖ=íÜÉ=pÉíìé=jÉåì
After DCS-200 initialization is complete, the Status Menu appears. This is the system’s
top-level menu. Refer to the “Status Menu
” section on page 44 for details.
To display the Setup Menu from the Status Menu, press SEL.
The figure below illustrates the Setup Menu:
Figure 4-9. Setup Menu (sample)
Following are descriptions of each Setup Menu function:
• Trans Time
• Output Menu
• Preview Menu
• Input Menu
• Key Setup Menu
• LOGO Setup Menu
• User Preference
• System Menu
• Tech Support
• Factory Reset
Note
When you make changes to input, output and system
parameters, your “configuration” information can be stored in
non-volatile memory — provided that you perform a “Save
Config” operation. In this way, your settings will be recalled
automatically each time the unit is turned on. Note that if the
“Auto Input Save” function is enabled in the User
Preferences Menu, the system automatically saves inputs.
SETUP MENU
> Trans Time 1.0
Output >>
Preview >>
Input >>
Key Setup >>
Logo Setup >>
User Preference >>
System >>
Tech Support >>
Factory Reset