Filter
Top Products
B. BARCO Control Manager
Shift adjustment
1. Click and drag the yellow screen in the direction you want to shift the image (steps of 8 pixels). The black screen indicates its
initial position. The shift values are g iven in a text box below the shifted image.
Or ,
Click once with the mouse on the shift screen and use the cursor keys on the keyboard to shift the image (steps of 1 pixel). The
black screen indicates its initial position. The shift values are giv en in a text box below the shifted im age.
To return to the default position, c lick on R eset.
Size adjustment
The size can be adjusted in a vertical or horizontal way.
The black screen indicates its initial position image B-11. The size values are given in a text box below the resized image. To return
to the default position, click on Reset.
Vertical Size adjustment
When adjusting the vertical size, The upper side of the image is fixed (table and ceiling mounted configurations) and only the lower
side can be moved to its exact pos ition. Therefore :
1. Click on the lower side of the image and drag it up or down until its correct position is obtained (steps of 8 pixels).
Or ,
Click once on the size screen and u se the ↑ or ↓ keys on the keyboard to resize the image (steps of 1 pixel).
Horizontal Size adjustment
When adjusting the hor izontal size, the left side of the image is fixed and only the right side can be m oved to its exact position.
Therefore:
1. Click on the right side of the image and drag it to the left or right until its correct positionis obtained (steps of 8 pixels).
Or ,
Click once on the size s creen and use the ← or → keys on the keyboard to resize the image (steps of 1 pixel).
Keystone adjustment
Keystone adjustment can be changed by :
1. moving with the mous e the slide bar up or down
Or ,
clicking on the up or down arrow on the edges of the slide bar.
A value indication for the setting w ill be given just below the slide bar of the keystone adjustm ent.
B.4.8 Blanking adjustment
What can be done
Blanking adjustments affect only the edges of the projected image an
d are used to frame the projected image on to the screen and
to hide or black out unwa nted information (or noise).
The blanking v alues ar e given in a text box below the image. A ’0’ value in the text box indicates no blanking.
100
R5976182 BARCOREA LITY 6500 30012001