Filter
Top Products
9. Service mode
9.13 Uniformity
Changing these settings may se riously affect the performance of the projector.
Start Up
1. Push the cursor key ↑ or ↓ to highlight Uniformity. (menu 9-25)
2. Press ENTER to select.
The following warn ing will be displayed : (menu 9-26)
Uniformity is reserved to qualified service personnel. If you are not qualified, press EXIT to cancel the panel adjustments.
SERVICE
BARCO LOGO
PANEL ADJUSTMENTS
UNIFORMITY
RESET INPUT BALANCE
I2C DIAGNOSIS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-25
WARNING
UNIFORMITY
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Menu 9-26
9.14 Preset Input Balance
Changing these settings may se riously affect the performance of the projector.
Start Up
1. Push the cursor key ↑ or ↓ to highlight Preset Input Balance. (menu 9-27)
2. Press ENTER to select.
The following warn ing will be displayed : (menu 9-28)
Preset input balance is reserved to qualified service personnel. If yo u are not qualified, press EXIT to cancel the panel adjust-
ments.
SERVICE
BARCO LOGO
PANEL ADJUSTMENTS
UNIFORMITY
RESET INPUT BALANCE
I2C DIAGNOSIS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-27
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
Menu 9-28
9.15 I2C Diagnoses
What can be done?
This menu gives an overview of the correct wor king of the I²C controlled IC’s.
84
R5976182 BARCOREA LITY 6500 30012001