Filter
Top Products
9. Service mode
9.7 Change Baudrate PC
Start Up
1. Push the cursor key ↑ or ↓ to highlight Change Baudrate PC. (menu 9-14)
2. Press ENTER to display the Change Baudrate PC menu. (menu 9- 15)
The actual baudrate will be highlighed.
The following baud rates are av ailable : 230400/115200/57600/38400/19200/9600/4800/1200
3. Push the cursor key ↑ or ↓ to higlight the desired baudrate.
4. Press ENTER to select.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
LAMP DIMMING
MORE...
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-14
CHANGE BAUDRATE PC
230400
115200
57600
38400
19200
9600
4800
1200
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-15
9.8 Reset Lamp Runtime
When is it allowed?
Reset lamp run time is only allowed when a new lamp is installed.
Start up
1. Push the cursor key ↑ or ↓ to highlight Reset Lamp Run Time. (menu 9-16)
2. Press ENTER.
The following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified service personnel. If you are not qualified, press EXIT to
cancel the reset operation. (menu 9-17)
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
LAMP DIMMING
MORE...
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 9-16
WARNING
---------------------
RISK OF
ELECTRICAL SHOCK
---------------------
RESET LAMP RUN TIME
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return
Menu 9-17
9.9 Lamp Run time History
What can be done?
Getting an overview of the different lamp run times
R5976182 BARCOREALITY 6500 30012001
81