Barco R9001960 Projector User Manual


 
2. Installation Guidelines
Necessary to ols
Toraysee
TM
cloth (delivered together with the lens kit). Order num ber : R379058.
Howtocleanthelens?
Proceed as follow :
1. Always wipe lenses with a CLEAN Toraysee
TM
cloth.
2. Always wipe lenses in a single direction.
Warning: Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3. Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.
Do not use fabric softener when wash ing the c leaning cloth o r softener sheets w hen drying the cloth.
Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Other lenses can also be cleaned safely w ith this Toraysee
TM
cloth.
2.4 Batteries
Overview
Battery installation
Battery replacement
2.4.1 Battery installation
How to install the battery
Two batteries are packed together with the RCU. Before using y our RCU, install first these batteries.
1. Remove the battery cover on the backside by pus hing the handle a little towards the bottom of the RCU.
2. Lift up the top side of the cover at the same time.
3. Insert the batteries as indicated in the RCU .
4. Put the battery cover on its place.
2.4.2 Battery replacement
How to replace the batteries in the RCU
To replace the batteries :
1. Remove the battery cover on the backside by pus hing the handle a little towards the bottom of the RCU.
2. Lift up the top side of the cover at the same time.
3. Push on the + side of the battery towards the - side
4. Lift up the battery at the same time.
5. Repeat for the second battery.
6. Insert the batteries as indicated in the RCU (battery type AA or LR6 or equivalent).
7. Put the battery co ver on its place. (image 2-6, image 2-7)
14
R5976182 BARCOREA LITY 6500 30012001