Filter
Top Products
8. Installation mode
To view or the change the input configuration.
1. Push the cursor key ↑ or ↓ to highlight Input S lots. (menu 8-4)
2. Press ENTER to select.
The input slots menu will be displayed. (menu 8- 5)
INSTALLATION
INPUT SLOTS
NO SIGNAL
LENS
TEXT BOX POSITION
QUICK ACCESS KEYS
START UP MODE
NETWORK CONFIGURATION
more ...
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 8 -4
INPUT SLOTS
SLOT SELECTOR [Automatic]
x 1. RGB [HV&VS]
- 2. RGB [HV&VS]
- 3. VIDEO
- 4. S-VIDEO
- 5. DIGITAL INPUT
- 6. IEEE 1394
Select with
↑
or
↓
<ENTER> to toggle
<EXIT> to return.
Menu 8 -5
The black indicated inputs are selectable and changeable. The gray indicated inputs are fix inputs and are not
changeable.
The indication in front of the digit means :
x : valid signal co nnected to the input.
- : no valid signal connected to the input.
Possible results for the input slots.
Source
Indication
Video or S -Video Video
S-video
RGB analog RGB-CV : separate sync is composite video on H/C input
RGB-HS &am p;VS: separate sync is horizontal and vertical s ync
RGB-CS : separate sync is composite sync
RGB-SOG : sync on green
Component Video Component video
IEEE 1394 IEEE1394
SDI Digital input
What if a switcher is connected to the projector ?
If a RCVDS (switched on) or VS05 is connected to the projector, it will be also indicated on the menu by adding +800 peripheral.
If no 800 pe ripheral indication is made on the menu, there are still two possibilities, no RCVDS or VS05 connected or RCVDS is
switched off.
When a 800 peripheral is connected to the projector, the input slots are not accessible with the cursor key to toggle their function.
8.4 No Signal
What will happen ?
If there is no signal connected to the projector,
• The background color can be black or blue
• The projector can shutdown after a certain time.
66
R5976182 BARCOREA LITY 6500 30012001